Filter
Top Products
62 PresentationPRO-II • User’s Guide
4. Menu Orientation
PIP Adjustment Menu
• Press {PIP} to return to the PIP Adjustment Menu. Refer to the “PIP
Adjustment Menu Functions” section on page 58 for details.
pÜ~Ççï=jÉåì
From the Border Menu or the Image Effects Menu, press {SHADOW} to display the
Shadow Menu
, a sample of which is shown below.
Figure 4-33. Shadow Menu (sample)
The Shadow Menu enables you place a shadow behind a PIP, and adjust its size, position
and transparency. The following functions are provided:
• Mode — enables or disables the PIP’s shadow.
• H Size < % > — adjusts the shadow’s horizontal size as a percentage of the PIP’s
size. If {
TRACK SIZE} is enabled, H and V size adjust proportionally.
• V Size < % > — adjusts the shadow’s vertical size as a percentage of the PIP’s
size. If {
TRACK SIZE} is enabled, H and V size adjust proportionally.
• H Pos < pixel > — adjusts the shadow’s horizontal position in pixels, as an offset
from the PIP’s horizontal position.
• V Pos < pixel > — adjusts the shadow’s vertical position in pixels, as an offset
from the PIP’s vertical position.
• Transparency — adjusts the shadow’s transparency, from 0 (full transparency) to
1024 (opaque).
• Enable the {TRACK SIZE} function to adjust the shadow’s H Size and V Size
proportionally.
• Press {PIP} to return to the PIP Adjustment Menu. Refer to the “PIP
Adjustment Menu Functions” section on page 58 for details.
Note
To remove any crop effects from the PIP or Key, press the
RESET button in the Layer Functions Section. No other
parameters will be affected.
V Size < % >
H Size < % >
Transparency
106
106
100
H
O
M
E
N
A
V
A
D
J
SHADOW
P
I
P
28
Mode On
11
H Pos < pixel >
V Pos < pixel >
TRACK SIZE
3
B
O
R
D
E
R
E
F
X