Filter
Top Products
104 PresentationPRO-II • User’s Guide
6. Operations
Working with Layers
4. In the Layer Functions Section, press TRANS. The current PIP transitions off
and the new KEY transitions on. The
TRANS button lights during the interval.
5. Adjust the Key’s clip, gain, mode, opacity, fill source, size and position, crop,
source size and special effects desired. Refer to the “
Modifying Keys and
DSKs“ section on page 107 for details.
jçÇáÑóáåÖ=mfmë
Use the following steps to modify a PIP:
S Assumption: A PIP is currently on Program.
1. In the Layer Functions Section, ensure that the PIP button is blinking. If not,
press
PIP to display the PIP Adjustment Menu. On the Source Selection Bus,
the source associated with the PIP will be solid.
2. Size and Position — Adjust H Size, V Size, H Position and V Position as
desired. In Chapter 4, refer to the "
PIP Adjustment Menu Description" section
on page 58 for menu details.
3. Source Size — From the PIP Adjustment Menu, press {SRC} to display the
Input Source Adjustment Menu. Use the menu to adjust the source image’s
size and position within the PIP. In Chapter 4, refer to the "
Input Source
Adjustment Menu Description" section on page 72 for menu details.
4. Crop — From the PIP Adjustment Menu, press {CROP} to display the Crop
Adjustment Menu
. Use the menu to select the type of crop, the aspect ratio, and
the image’s H and V size. In Chapter 4, refer to the "
Crop Menu" section on
page 61 for menu details.
5. Border — From the PIP Adjustment Menu, press {BORDER} to display the
Border Menu. Use the menu to select the border’s style, color and size. In
Chapter 4, refer to the "
Border Menu" section on page 60 for menu details.
6. Shadow — From the Border Menu, press {SHADOW} to display the Shadow
Menu
. Use the menu to choose the shadow’s size, position and transparency. In
Chapter 4, refer to the "
Shadow Menu" section on page 62 for menu details.
7. Special Effects — From the Border Menu, press {EFX} to display the Image
Effects Menu
. Use the menu to select monochrome or color mode, to modify
chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer
to the "
Image Effects Menu" section on page 63 for menu details.
8. Global Functions — Remember that the following global functions are always
available to you:
~ Press Reset to reset the current effect (e.g., PIP, Key, crop, etc.) to a
nominal default value.
~ Press Full Screen to bring the PIP to full screen, using the source’s
height as the defining factor.
~ Press Freeze to freeze the PIP. Press again to unfreeze.
Note
Because the PIP is on Program, it is recommended that you
make slow, smooth adjustments during a live production.