Filter
Top Products
PresentationPRO-II • User’s Guide 107
6. Operations
Working with Layers
jçÇáÑóáåÖ=hÉóë=~åÇ=aphë
Use the following steps to modify a Key or DSK:
S Assumption: A Key (or DSK) is currently on Program.
1. Use one of two methods to access the key adjustment menus:
~ For a Key — In the Layer Functions Section, press KEY to activate the
current Key for modification. The
Key Menu appears.
~ For a DSK — Press BG/DSK to display the BG/DSK Input Setup Menu
appears. Then press {KEY} to display the DSK Adjustment Menu.
2. Clip, Gain, Mode, Opacity — Use the controls to adjust clip, gain, invert mode
and opacity. In Chapter 4:
~ Refer to the "Key Menu Description" section on page 66.
~ Refer to the "DSK Adjustment Menu" section on page 78.
3. Fill Source — Use the controls in the Key Menu to select a self or matte fill key.
If
Matte is selected, press {MATTE} to display the Matte Menu, with which you
can choose the matte fill color. In Chapter 4, refer to the "
Matte Menu" section
on page 68 for menu details.
S For a Key only:
4. Size and Position — From the Key Menu, press {SIZE & POS} to display the
Key Adjustment Menu. Use the controls to size and position the Key. In
Chapter 4, see the "
Key Adjustment Menu" section on page 69 for menu details.
5. Crop — From the Key Menu, press {CROP} to display the Crop Adjustment
Menu
. Use the menu to select the type of crop, the aspect ratio, and the image’s
H and V size. In Chapter 4, refer to the "
Crop Menu" section on page 61 for
menu details.
6. Source Size — From the Crop Menu, press {SRC} to display the Key Source
Adjustment Menu
. Use the menu to adjust the source image’s size and position
within the PIP. In Chapter 4, refer to the "
Input Source Adjustment Menu
Description" section on page 72 for menu details.
7. Special Effects — From the Matte Menu, press {EFX} to display the Image
Effects Menu
. Use the menu to select monochrome or color mode, to modify
chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer
to the "
Image Effects Menu" section on page 63 for menu details.
8. Global Functions — Remember that the following global functions are always
available to you:
~ Press Reset to reset the current effect to a default value.
~ (For a Key only) Press Full Screen to bring the Key to full screen, using
the source’s height as the defining factor.
~ Press Freeze to freeze the Key. Press again to unfreeze.
S For a Key and a DSK:
9. Transition — Transition the new "look" to program with a MIX or WIPE. Refer to
the “
Working with Transitions“ section on page 115 for details.
Note
Because the Key is on Program, it is recommended that you
make slow, smooth adjustments during a live production.