Filter
Top Products
BACnet Communications - Thermal Management Products
253 Liebert
®
IntelliSlot
®
Modbus/BACnet IP
Remote Sensor Average Temperature Average value of remote sensor temperature measurements.
Remote Sensor Average Under
Temperature
[Remote Sensor Average Temperature] has dropped below [Remote Sensor
Under Temp Threshold].
Remote Sensor Issue Remote sensor is disconnected or the signal is out of range.
Remote Sensor Maximum Temperature Maximum value of remote sensor temperature measurements.
Remote Sensor Over Temp Threshold Threshold value used in the remote air sensor over temperature events.
Remote Sensor Over Temperature
[Remote Sensor Temperature] has exceeded [Remote Sensor Over Temp
Threshold].
Remote Sensor System Average Over
Temperature
[Remote Sensor System Average Temperature] has exceeded [Remote Sensor
Over Temp Threshold].
Remote Sensor System Average
Temperature
Average value of remote sensor temperature measurements among a group of
interconnected units in a single system.
Remote Sensor System Average Under
Temperature
Remote Sensor System Average Temperature] has dropped below [Remote
Sensor Under Temp Threshold].
Remote Sensor System Maximum
Temperature
Maximum value of remote sensor temperature measurements among a group of
interconnected units in a single system.
Remote Sensor Temperature Air temperature as measured by remote sensor.
Remote Sensor Under Temp Threshold Threshold value used in the remote air sensor under temperature events.
Remote Sensor Under Temperature
[Remote Sensor Temperature] has dropped below [Remote Sensor Under Temp
Threshold].
Return Air Over Temp - Event Control
Enable/disable the activation of the [Return Air Over Temperature] event. If set
to 'disabled', the event will not be annunciated. This implies that the event will
not be placed in any active event list or in any event history list.
Return Air Over Temp - Event Type The event type for the [Return Air Over Temperature] event.
Return Air Over Temp Threshold Threshold value used in the [Return Air Over Temperature] event.
Return Air Over Temperature Return air high temperature event.
Return Air Sensor Event Control
Enable/disable the activation of events related to measurements by the return
air sensor.
Return Air Sensor Issue The air sensor at the inlet of the unit is disconnected or the signal is out of range.
Return Air Temperature Set Point Desired air temperature at the inlet of the unit.
Return Air Temperature The temperature of the inlet air
Return Air Under Temp - Event Control
Enable/disable the activation of the [Return Air Under Temperature] event. If set
to 'disabled', the event will not be annunciated. This implies that the event will
not be placed in any active event list or in any event history list.
Return Air Under Temp - Event Type The event type for the [Return Air Under Temperature] event.
Return Air Under Temp Threshold Threshold value used in the [Return Air Under Temperature] event.
Return Air Under Temperature
[Return Air Temperature] has dropped below [Return Air Under Temp
Threshold].
Return Dew Point Dew point temperature measured at the inlet of the unit.
Return Humidity Sensor Issue
The humidity sensor at the inlet of the unit is disconnected or the signal is out of
range.
Return Humidity Set Point Desired relative humidity at the inlet of the unit.
Return Humidity Relative humidity measured at the inlet of the unit.
Server Class The general classification for this system
Service Required - Event Control
Enable/disable the activation of the [Service Required] event. If set to 'disabled',
the event will not be annunciated. This implies that the event will not be placed
in any active event list or in any event history list.
Service Required - Event Type The event type for the [Service Required] event.
Table 82 Liebert Challenger 3000
™
, Liebert Challenger ITR
™
, Liebert CW
™
, Liebert Deluxe System/3
™
,
Liebert DS
™
, Liebert DSE
™
, Liebert HPM
™
, Liebert PeX
™
- Glossary
Data Label Data Description