Filter
Top Products
108 Faxing
Customizing Scan to Fax
You can add (or change) header information that appears at the
top of your faxes and set up the speed dial buttons. Follow these
steps:
1. In the Scan to Fax window, click the
Setting
button.
You see the Setting window:
2. Under Personal Information, enter the text you want to
appear on the header at the top of your faxes.
3. If necessary, select a Scan Size. Normally you will leave the
Scan Size setting on
Letter
. However, you can also choose
A4 or Legal if you’re faxing documents on these paper
sizes. For sizes not listed, choose
Custom
. Then enter the
size of the document you’re faxing.
4. If you’re using the automatic document feeder, select
Enable ADF.
5. You can enter fax numbers for up to 10 speed-dial buttons.
These numbers will then be dialed automatically when you
click the corresponding speed dial button on the Scan to
Fax window. Click a button number, then enter the fax
number for each one.
6. Click
OK to close the Setting window. You return to the
Scan to Fax window.
note:
You must use the
optional automatic
document feeder to fax
documents more than
11.7 inches long.