Filter
Top Products
130 Maintenance
4. Use a soft, clean cloth and mild detergent to clean the outer
case and inside of the sheet feeder. Be careful not to soak
the cloth—just dampen it. Keep the document and
maintenance covers closed to prevent moisture from getting
inside.
5. Clean the document table with a soft, dry cloth, or with a
blower brush.
6. If ink leaks inside the EPSON Stylus Scan, wipe it away
with a damp cloth.
Transporting the EPSON Stylus
Scan
For short moves, you can just pick up the EPSON Stylus Scan
and set it down. For longer moves, you need to repack it in its
original box and lock the print head and transportation lock.
Follow these steps:
1. Turn on the EPSON Stylus Scan and wait until the print
head locks in position. Then turn off the EPSON Stylus
Scan.
2. Unplug the power cord, then disconnect the interface
cable.
3. Open the document and maintenance covers.
warning:
Be careful not to touch
the internal gears.
caution:
To avoid damage,
always leave the ink
cartridges installed
when transporting the
EPSON Stylus Scan.
Also, remember to lock
the print head and the
transportation lock.