Filter
Top Products
Solving Problems 139
You see the following message: Please insert your
WinFax Basic Edition installation media.
Remove your Windows CD-ROM and insert the EPSON
Stylus Scan 2500 CD-ROM. Then click
OK
.
When you connect it to a parallel pass-through port on
your Zip
®
drive, your EPSON Stylus Scan doesn’t
work.
The EPSON Stylus Scan is not designed to work on this type of
port. You must remove the Zip drive and connect it to a
different port. (You may need to install a second parallel port.)
Connect the EPSON Stylus Scan directly to your computer’s
built-in parallel port. Do not use a switch box. You can also
connect the EPSON Stylus Scan to your USB port
(Windows 98 only).
After you use your EPSON Stylus Scan with a parallel
connection, your Zip drive doesn’t work when you
reconnect it to the same parallel port.
You may need to reinstall your Zip drive software. To avoid this
problem, you can disable the Zip drive in your Windows
Device Manager before you connect the EPSON Stylus Scan.
See your Windows Help for more information.
You’re printing over a network.
See your electronic EPSON Stylus Scan 2500 Reference Guide for
computer configuration instructions.