Filter
Top Products
138 Solving Problems
The printer has finished charging the ink cartridge,
but the
Operate
light is still flashing.
■
Make sure the ink cartridge clamps are locked into place.
■
Make sure all packing material has been removed from the
printer.
■
If the printer is not moving or making noise, but the light is
still flashing after 5 minutes have passed, turn the printer
off. If the light is still flashing when you turn it back on,
contact your EPSON dealer or see “Where To Get Help”
on page 154.
You’re having problems installing the software.
■ Make sure your EPSON Stylus Scan is plugged in and
turned on.
■
Make sure you’ve closed all other applications, including
any screen savers. Then try installing the software again,
following the instructions on the Start Here sheet.
When you connect to a USB port on a Windows
computer, several USB devices are recognized and
installed.
This is the correct installation procedure. Your EPSON
Stylus Scan includes a printer, scanner, and internal USB hub.
Even though the process may seem repetitious, make sure you
don’t cancel out of the installation.
You see the following message: Setup cannot find the
Windows printer files needed to set up the WinFax
printer driver.
Remove the EPSON Stylus Scan 2500 CD-ROM and insert
your Windows 95 or Windows 98 CD-ROM. Then click
OK
.
If you don’t have a Windows CD-ROM, locate the Windows
source files on your hard disk drive. (They may be in the
Win 95 or Win 98 folder.) If you need help locating the
Windows source files, contact your computer manufacturer.