Filter
Top Products
140 Solving Problems
Solving Problems with Printing and
Copying
Only the Operate light is on, but nothing prints.
■
Turn off the EPSON Stylus Scan and your computer.
Make sure the interface cable is connected securely.
(Use a fully shielded USB “AB” interface cable or an
IEEE-1284 compliant parallel cable.)
■ Make sure there’s no packing material inside the EPSON
Stylus Scan or the automatic document feeder, if you’re
using it.
■
Run a printer check as described on page 135. If the check
page printed, make sure your EPSON Stylus Scan and
application software are installed correctly. If you’re
printing on a network, you need to set up your EPSON
Stylus Scan for network printing, as described in your
electronic EPSON Stylus Scan 2500 Reference Guide.
The EPSON Stylus Scan sounds as though it is
printing, but nothing prints.
Make sure the print head nozzles are not clogged. To run a
cleaning cycle, see “Cleaning the Print Head” on page 126.
Your EPSON Stylus Scan makes noise when you turn
it on or after it has been sitting for a while.
Your printer is performing routine maintenance.
note:
If you’re trying to print
or copy a large image,
your computer may not
have enough memory.