Filter
Top Products
146 Solving Problems
You see vertical banding or misalignment.
■
Make sure the print head nozzles are not clogged. To run a
cleaning cycle, see “Cleaning the Print Head” on page 126.
■ Run the Print Head Alignment utility. See “Aligning the
Print Head” on page 129 for instructions.
■
Make sure the printable side of the paper is face up. It is
usually whiter or shinier.
■
Don’t use the
High Speed
setting in the printer software.
■
Set the paper thickness switch to the
0
position.
■ Place the EPSON Stylus Scan on a stable, level surface.
Make sure none of the five rubber feet is missing from the
bottom.
paper thickness switch