Filter
Top Products
DISASSEMBLY AND ASSEMBLY
3.2.6.1 Fan Removal
Step 1: Remove the upper case unit. (Refer to Section 323.4.)
Step 2: Remove the right cover. (Refer to Section 3.2.3.2.)
Step 3:
Disconnect the connector for the fan from the relay connector.
Step 4: Remove the CP(0) screw securing the fan duct to the left frame and the CC screw securing the
fan and the fan duct to the shaft on the left frame. Then remove the fan along with the fan duct.
CP(0) (4x5)
Figure 3-45. Fan Removal
Rev. A
3-31