Filter
Top Products
DFX-8500
3.2.6.6 Upper Paper Guide and Top PE Sensor Removal
Step 1: Remove the paper bail assembly. (Refer to Section 326.7)
Step 2: Disconnect the red. 3-pin, top PE sensor connector from the connector junction board assembly.
Lefl Side
Frame
Connector Junction
Figure 3-57. Top PE Sensor Connector Removal
Step 3: Remove the two CBS (M4x6) screws securing the upper paper guide to both frames and remove
the paper guide.
Step 4: Remove the two CPS(SP) (M3x8) screws securing the top PE sensor to the upper paper guide and
remwe the sensor.
Top PE Sensor
Upper Paper Guide
Figure 3-58. Top PE Sensor Removal
3-40
Rev. A