Filter
Top Products
LYFX-8500
5.1.2 Bypassing Interlock Switch and Cover Open Sensor
To print with the top cover open or removed, you need to bypass the interlock switch and cover open sensor
because these sensors automatically disable printing when the top cover is open.
--~ . . . . . . . . . . . . . . . . . .._.........................................................._
: :
: :
.._ . . . . . . . . . . . . . . . . . . . . . . . . . _.
: :
: :
. . . .
r’.............. . . . . . . . . . . . . . . . . . . . . . i
: :>
: ‘\
: ..’
: ..’
i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interlock SW. &
IL
CN3
Conne&r
Junctionp
I . . . . . . . m...” . . . . . i
i . . . . . .i
i . . . . . . . .i
Figure 5-l. Interlock Switch Assembly Location
The interlock switch and cover open sensor consists of an assembly. To bypass the interlock switch and the
cover open sensor,
1. remove the lefl side cover.
2. dislocate the interlock switch and cover open sensor assembly from the housing,
3. install the spacer (APPROX. 13 mm thickness, such as an eraser).
Cover Open
To Connector Junction Board
Interlock SW.
Figure 5-Z. Bypassing Interlock Switch and Cover Open Sensor
5-2
Rev. A
.~