Filter
Top Products
GENERAL DESCRIPTION
1.5.7 Control Panel
The control panel for this printer consists of switches, LED% and buzzers (Refer to Figure l-22 on page
l-23.).
1.5.8 Housing
The housing for this printer consists of the upper housing, lower housing, printer cover, ink cartridge cover,
rear sheet guide, tractor unit, knob, adjust lever and release lever.
The housing used in the DFX-8500 consists of many more components than previous designs.
The lower case is used as the main frame which holds the mechanism and circuits, and they are covered
by the upper case, bonom plate and side cover, each of which has various covers. The housing large
openings in both the front and rear for paper entrance and exit. It also has a lid on the both plate to enable
the PROM on the main board to be easily replaced.
Figure 1-31. Housing
Rev. A
l-43