Filter
Top Products
DFX-6500
3.2.6.22 Carriage Mechanism Disassembly
This section describes how to disassemble the carriage mechanism, including removing the carriage, CR
timing belt, and front and rear carriage guide shafts.
Step 1: Remove the CR motor. (Refer to Section 3.2.6.20)
Step 2: Remove the belt pulley from the belt pulley holder.
Figure 3-60. Belt Pulley Removal
Step 3: Unhook the spring securing the encoder belt to the right side frame. (Refer to Figure 2-5.)
Step 4: Loosen the two flange nuts securing the front carriage guide shaft to the lefl and right side frames
Figure 3-81. Front Carriage Guide Shafi Removal
3-56
Rev. A