Filter
Top Products
DFX-8500
1.4.3 DIP Switch Settings
There are five DIP switches that are located at the front paper entrance of the printer. These DIP switches
can set the printer defaults.
When power is applied or the printer is reset, the DIP switch selections are treated as the default setup. If
the setup is changed, the power should be cycled or the printer should be reset.
Table l-16 shows the DIP switch selections forthis printer.
Table l-16. DIP Switch Settings
Switch No.
Function Off
I On Factory Setting
l-1 to l-6 Character table
Refer to Tables 1-17 or i-18. All Off
1-7 Skip over perforation
Inactive 1 Active Off
1-8
Print direction
Ei-d. ( M-d.
Off
2-1 to 2-4
Page length for front tractor
Refer to Table 1-l 9.
All Off
2-5 to 2-8
Page length for rear tractor
1 Refer to Table l-20. All Off
Rev. A