Filter
Top Products
2-5
Installation
Installing Analyzer Hardware
2
2. Install the THGm card in your system. This requires opening the case of your
computer, inserting the card in an available PCI slot, and closing the case of
your computer. Refer to the THGm Hardware Installation Guide and your
computer’s documentation for instructions.
3. Secure the network connectors to the THGm, RJ-45 for 10/100Mbps Ethernet
or SC-type fiber optic for 1000Mbps Ethernet (optional – connection to the
network may be performed after card installation is complete).
4. Power up your system. Windows will detect the new card and display the
“New Hardware Found” message. Windows will then prompt for
configuration software with the
Update Device Driver Wizard window. Click the
Next button to continue.
CAUTION
If the “New Hardware Found” window does not display, then the
hardware detection process was unable to find your adapter. The driver
can only be installed for Plug'n'Play adapters when the hardware can be
detected. Please consult your Windows manual for possible reasons for
this occurrence before contacting
Finisar Technical Support.
5. Insert the Surveyor CD in the CDROM drive.
6. Use the
Browse... button to find the Ethernet Driver directory
(
<CDROM-drive-letter>\drivers) on the Surveyor CDROM. The name of the
driver is
ww_w2000.inf.
7. The
Update Device Driver Wizard window will appear with the name of the
driver. Click the
Finish button.
8. The Finisar driver will be copied to the hard drive. Windows will request the
Windows CDROM to install system files. Many of these system files can be
found directly on the hard drive in the
C:\windows\system and C:\windows
directory without using the CDROM.
9. Install Surveyor software and reboot your system.
10. To verify installation, open the Surveyor software. The THGm analyzer card
icon should appear under your local IP address.
Installing Analyzer Hardware in a Notebook PC
Finisar offers an Ethernet analyzer card that can be installed in a notebook PC, the
Portable Surveyor 10/100 Ethernet Analyzer Card (CardBus interface). Surveyor
software is used with at least one analyzer card from Finisar.
Please read the following before starting card installation: