Filter
Top Products
4-27
Configuring Surveyor
Advanced Configuration
4
thermore suppose the network administrator only wants to decode TCP port 11964
when associated with IP address 192.168.1.98. The entry in the ANALYSIS.INI
file would be:
[TCP]
mapping=11964,192.168.1.98,TDS,Sybase TDS
Example 3
Assume that two real-time applications have been installed on a network that both
use RTP (Real-Time Transport Protocol). Assume that one of the applications uses
UDP port 10564 and the other uses 11964. Both of the UDP ports differ from the
default port of 5004. The entries in the ANALYSIS.INI file would be:
[UDP]
mapping=10564,*,RTP,RTP APPLICATION 1
mapping=11964,*,RTP,RTP APPLICATION 2
Parser Names
The tables in Appendix D contain the Parser Names that are built into Surveyor.
Each parser is responsible for decoding a specific protocol. Parser Names are as
similar as possible to protocol names. Parser Names must be entered exactly as
shown in the tables to correctly reference the built-in parser.