Filter
Top Products
4-13
Configuring Surveyor
System Settings
4
:
Table 4-7. Strip Chart Display Timers
The values for polling timers must be between 1 and 214783647 seconds. The
values for the display timers must be between 1 and 214783647 seconds. The
strip chart display timers must be in multiples of the MAC Layer Counter timer.
The default settings, in seconds, are shown in Table 4-8:
Table 4-6. Remote Polling Timers
Polling Timers Description
MAC Layer Counters Sets the interval for polling devices for MAC layer counters.
Protocol Distribution Sets the interval for polling devices for the protocol distribution information.
Host Table Sets the interval for polling devices for MAC layer host table information.
Matrix Views Sets the interval for polling devices for information on MAC, network, and
application layer conversations.
Expert Data Sets the interval for polling devices for expert data.
Remote Name Table Sets the polling interval for refreshing the local copy of the name table for
a remote resource.
Display Timers Description
Strip Chart Display
Timer, Local
Sets the time between refreshing counters in strip charts for resources in
the local PC. This display timer is available for strip charts only.
Strip Chart Display
Timer, Remote
Sets the time between refreshing counters in strip charts for resources in
remote hosts. This display timer is available for strip charts only.
Table 4-8. Default Display Timer Settings
Display Timer Default Value
MAC Layer Counters 3
Protocol Distribution 5
Host Table Views 7
Matrix Views 10
Expert Data View 15
Remote Name Table 300
Strip Chart, Local 1
Strip Chart, Remote 3