Filter
Top Products
Changing autoreduction settings for incoming faxes
If the fit-to-page option is turned on, the device automatically reduces long faxes up to 75
percent to fit the information on the default paper size (for example, the fax is reduced from
legal to letter size).
If the fit-to-page option is turned off, long faxes print at full size on multiple pages. The
factory-set default for incoming fax autoreduction is On.
If you have the stamp-received faxes option turned on, you might also want to turn on
autoreduction. This reduces the size of the incoming faxes slightly, and prevents the page-
stamp from forcing a fax onto two pages.
Note
Make sure that the media-size setting matches the size of the media that is loaded in the
media input tray. To change the default media size, see
Changing the default media size.
To change autoreduction for incoming faxes
1. On the device control panel, press M
ENU
.
2. Use the < or the > button to select Fax setup, and then press E
NTER
.
3. Use the < or the > button to select Fax Recv. setup, and then press E
NTER
.
4. Use the < or the > button to select Fit to page, and then press E
NTER
.
5. Use the < or the > button to select On or Off, and then press E
NTER
to save your
selection.
96 Chapter 8 Fax ENWW