HP (Hewlett-Packard) 2840 Printer User Manual


 
Maximizing print speed for letter-size paper
The printer can print at 20 ppm in black on letter-size paper. When printing letter-size pages
from tray 2, this happens automatically.
For tray 1, the printer is set at the factory to print 19 ppm in black on letter-size paper. To
achieve a print speed of 20 ppm from tray 1, set the tray 1 size to letter. To set the tray 1
size, open the HP Toolbox, click the Settings tab, click Configure Device, and click Paper
Handling. Set the tray 1 size to letter.
When tray 1 is configured for letter, and a print job specifies another media size such as
envelopes, the Error light blinks until you load the correct print media into tray 1 and press
E
NTER
.
Also, to achieve a print speed of 20 ppm (19 ppm for A4), you must set the device to print in
grayscale. For more information, see
Printing in grayscale.
ENWW Maximizing print speed for letter-size paper 43