HP (Hewlett-Packard) 2840 Printer User Manual


 
Supported media weights and sizes
For optimum results, use conventional 75 to 90 g/m
2
(20 to 24 lb) photocopy paper. Verify
that the paper is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust,
wrinkles, curls, and bent edges.
Note
The device supports a wide range of standard and custom sizes of print media. The capacity
of trays and bins can vary depending on media weight and thickness and environmental
conditions. Use only transparencies that are designed for use with HP color LaserJet
printers. Inkjet and monochrome transparencies are not supported for this device.
Tray 1 specifications
Media
Dimensions
1
Weight
Capacity
2
Paper Minimum: 76 by 127 mm (3
by 5 inches)
60 to 177 g/m
2
(16 to 47 lb) Up to 125 sheets of 75 g/m
2
(20 lb) paper
Maximum: 216 by 356 mm
(8.5 by 14 inches)
Glossy paper Same as the preceding
listed minimum and
maximum sizes.
75 to 120 g/m
2
(20 to 32 lb)
Maximum stack height: 12 mm
(0.47 inches)
HP Cover paper
3
203 g/m
2
(75 lb cover)
50 (typically)
Transparencies and
opaque film
Thickness: 0.10 to 0.13 mm
(3.9 to 5.1 mils)
50 (typically)
Labels
4
Thickness: up to 0.23 mm
(up to 9 mils)
50 (typically)
Envelopes
Up to 90 g/m
2
(16 to 24 lb)
Up to 10
1
The printer supports a wide range of standard and custom sizes of print media. Check the printer driver for
supported sizes.
2
Capacity can vary depending on media weight and thickness, and environmental conditions.
3
Hewlett-Packard does not guarantee results when printing with other types of heavy paper.
4
Smoothness: 100 to 250 (Sheffield).
ENWW Supported media weights and sizes 23