Filter
Top Products
Redialing manually
If you want to send another document to the last fax number that was dialed, use the
following procedure to redial manually. If you are trying to resend the same document that
you sent the first time, wait until the automatic redial attempts have stopped or until you have
stopped them yourself. Otherwise, the recipient might get the fax twice: once from the
manual redial attempt and once from one of the automatic redial attempts.
Note
To stop the current redial attempt for a fax, or to cancel all pending, automatic redial
attempts for a fax, see
Canceling a fax job. To change redial settings, see Changing the
redial settings.
To redial manually
1. Load the document into the automatic document feeder (ADF) input tray or onto the
flatbed scanner.
2. On the device control panel, press R
EDIAL
/P
AUSE
.
3. Press S
TART
F
AX
. The device redials the last number that was dialed and attempts to
send the fax.
If you are scanning from the flatbed scanner, select YES when Send from glass?
1=Yes 2=No appears, and then press E
NTER
.
ENWW Redialing manually 81