Filter
Top Products
6. Press or to highlight the correct paper type.
7. Press
to select the correct paper type.
A Setting saved message appears, and then the current type and size settings are displayed.
Configuring Tray 2 and optional Tray 3 for a custom paper size
The printer automatically detects many sizes of paper, but you can also configure trays for custom paper
sizes. You must specify the following parameters:
●
Unit of measure (millimeters or inches)
●
X dimension (the width of the page as it feeds into the printer)
●
Y dimension (the length of the page as it feeds into the printer)
1 Media width guides
2 Media length guides
3 Page width (X dimension)
4 Page length (Y dimension)
Use the following procedure to configure a tray for a custom size. Once a custom size is set for a tray,
it will be retained until the media length guides are reset.
Setting a custom size in Tray 2 or optional Tray 3
1. Open the tray and place the media face-up in the tray.
2. Set the media length guides to the appropriate non-standard position and close the tray.
3. When the tray configuration message appears, press
.
4. Press
to change ANY CUSTOM to custom.
5. Press
to select custom.
6. Press
or to highlight the correct unit (either millimeters or inches).
ENWW Configuring input trays 85