Filter
Top Products
Control panel message Description Recommended action
5.
Press
to access help for the supply.
6. Obtain a part number from help.
7. Order the supply.
8. Repeat the previous steps as necessary
for each supply that needs to be
ordered.
9. Supplies ordering information is also
available from the embedded Web
server. See
Using the embedded Web
server for more information.
ORDER TRANSFER KIT
LESS THAN X PAGES
For help press
alternates with
Ready
The transfer unit is near end of life. Printing
can continue.
1.
Press
to view help for the message.
2. Obtain the transfer kit part number from
help.
3. Order the transfer kit.
NOTE Supplies ordering
information is also available from the
embedded Web server. See
Using
the embedded Web server for more
information.
Paused
To return to Ready
press STOP
The printer is paused, and there are no error
messages pending at the display. The I/O
continues receiving data until memory is full.
Press the Stop key.
Performing
upgrade
A firmware upgrade is in process. Do not turn the printer off until the printer
returns to Ready.
Performing...
PAPER PATH TEST
The printer is performing a paper path test. No action necessary.
Please wait The printer is in the process of clearing data. No action necessary.
PRINT/STOP TEST The printer is performing a print/stop test. No action necessary.
PRINTING STOPPED This message is displayed when a Print/Stop
Test is run and time expires.
Press to continue printing.
Printing...
CMYK SAMPLES
This message displays while the printer
CMYK samples page is being generated.
No action necessary.
Printing...
CONFIGURATION
The printer is generating the configuration
page. The printer will return to the online
Ready state when the page is completed.
No action necessary.
Printing...
DEMO PAGE
The printer is generating the demo page. The
printer will return to the online Ready state
when the page is completed.
No action necessary.
174 Chapter 8 Problem solving ENWW