Filter
Top Products
Control panel message Description Recommended action
Then press to
print second sides
Moving solenoid
To exit press. Stop
The printer is executing a component test and
the component selected is a solenoid.
No action necessary.
Moving solenoid and motor
To exit press. Stop
The printer is executing a component test and
the components selected are the solenoid
and the motor.
No action necessary.
No job to cancel There are no stored jobs that can be
canceled.
No action necessary.
NON HP SUPPLY
IN USE
alternates with
Ready
The supplies gauge will display the
consumption levels of print cartridges, but the
level of any refilled cartridge will not be
shown.
The printer has detected that a non-HP print
cartridge is currently installed.
If you believe you purchased an HP cartridge,
please call the HP fraud hotline (1–877–219–
3183, toll-free in North America).
CAUTION Any printer repair
required as a result of using non-HP
cartridges is not covered under HP
warranty.
ORDER [COLOR]
CARTRIDGE
The supplies gauge will display the
consumption levels of print cartridges.
alternates with
Ready
The supplies gauge will display the
consumption levels of print cartridges.
The identified print cartridge is nearing the
end of its useful life. The printer is ready and
will continue for the estimated number of
pages indicated. Estimated pages remaining
is based upon the historical page coverage of
this printer.
Printing will continue until a supply needs to
be replaced.
1.
Press
to view help for the message.
2. Obtain the part number for the print
cartridge indicated.
3. Order a print cartridge
NOTE Supplies ordering
information is also available from the
embedded Web server. See
Using
the embedded Web server for more
information.
ORDER FUSER KIT
LESS THAN X PAGES
For help press
alternates with
Ready
The fuser is near the end of its life. The printer
is ready and will continue for the estimated
number of pages indicated.
Printing will continue until a supply needs to
be replaced.
1.
Press
to view help for the message.
2. Obtain the part number for the fuser kit.
3. Order the fuser kit.
NOTE Supplies ordering
information is also available from the
embedded Web server. See
Using
the embedded Web server for more
information.
ORDER SUPPLIES
alternates with
Ready
For help press
The supplies gauge will display the
consumption levels of print cartridges.
More than one supply item is low.
Printing will continue until a supply needs to
be replaced.
1. Press Menu to access the menus.
2. Press
or to highlight
INFORMATION, and then press
.
3. Press
or to highlight SUPPLIES
STATUS, and then press
.
4. Press
or to highlight a supply that
needs to be ordered.
ENWW Control panel messages 173