Filter
Top Products
7. Press to select the value.
After the unit of measure is set properly, set the X dimension as follows:
8. Press
or to highlight the correct value.
9. Press
to select the value. If the value entered is outside the valid range, Invalid value will appear
for two seconds. The display prompts you to enter another value.
After the X dimension is set properly, set the Y dimension as follows:
10. Press
or to highlight the correct value.
11. Press
to select the value. If the value entered is outside the valid range, Invalid value will appear
for two seconds. The display prompts you to enter another value. The printer displays a message
indicating the dimensions for the custom size.
Printing from Tray 1 (multipurpose tray)
Tray 1 is a multipurpose tray that holds up to 100 sheets of 75 g/m
2
(20 lb) paper or 20 envelopes. It
provides a convenient way to print envelopes, transparencies, custom-size paper, media heavier than
32 lb, or other types of media without having to unload the other trays.
Loading Tray 1
CAUTION To avoid jams, never add or remove paper from Tray 1 during printing.
1. Open Tray 1.
2. Set the side guides to the desired width.
3. Load paper in the tray with the side to be printed facing down and the top of the page facing you.
NOTE Tray 1 can hold approximately 100 sheets of standard 75 g/m
2
(20 lb) office paper.
NOTE If you are duplex printing, see Two-sided (duplex) printing for loading instructions.
86 Chapter 4 Printing tasks ENWW