Filter
Top Products
8. Press or to select the appropriate time period.
9. Press
to set the time period.
10. Press Menu.
NOTE If media is loaded in optional Tray 3 when the printer is in sleep mode, the printer
will not sense new media when it comes out of sleep mode. This could cause the printer to
use wrong paper for a print job. Be sure to wake the printer before loading media in optional
Tray 3.
Disabling/enabling sleep mode
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight RESETS.
5. Press
to select RESETS.
6. Press
to highlight SLEEP MODE.
7. Press
to select SLEEP MODE.
8. Press
or to select ON or OFF.
9. Press
to set the selection.
10. Press Menu.
Wake time
The wake time feature allows you to instruct the printer to wake at a certain time on selected days, to
eliminate waiting for the warm-up and calibration periods. You must have SLEEP MODE on to set the
wake time.
To set or change the wake time, use the following steps:
Setting the wake time
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight WAKE TIME.
7. Press
to select WAKE TIME.
8. Press
or to select the day of the week.
ENWW Changing printer control panel configuration settings 59