Filter
Top Products
Control panel message Description Recommended action
DIMMS
LOAD TRAY 1:
[TYPE] [SIZE]
alternates with
LOAD TRAY 1:
[TYPE] [SIZE]
For help press
Tray 1 is loaded and configured for a type and
size other than the one specified in the job.
1. If the correct paper is loaded, press .
2. Otherwise, remove the incorrect paper
and load Tray 1 with the specified paper.
3. If prompted, confirm the size and type of
paper loaded.
4. Confirm that the media guides are in the
correct position.
5. To use another tray, remove paper from
Tray 1 and then press
.
LOAD TRAY 1:
[TYPE] [SIZE]
For help press
This message appears when Tray 1 is
selected but is not loaded, and no other paper
trays are available for use.
Load the correct paper in Tray 1 and press
to continue.
If prompted, confirm the size and type of
paper loaded.
LOAD TRAY 1:
[TYPE] [SIZE]
To use another
tray press
Alternates with
LOAD TRAY 1:
[TYPE] [SIZE]
For help press
This message appears when Tray 1 is
selected but is not loaded, and other paper
trays are available for use.
1. Load the correct paper in the tray.
2. If prompted, confirm the size and type of
paper loaded.
3. Otherwise, select another tray.
LOAD TRAY X
[TYPE] [SIZE]
For help press
This message appears when Tray XX is
selected but is not loaded, and no other paper
trays are available for use.
Load the correct paper in the tray and
press
to continue.
LOAD TRAY X
[TYPE] [SIZE]
To use another
tray press
alternates with
LOAD TRAY X
[TYPE] [SIZE]
For help press
Tray XX is either empty or configured for a
type and size other than specified in the job,
and another paper tray is available.
1. Load the paper tray with the specified
media.
2. Confirm that the media guides are in the
correct position.
3. If prompted, confirm the size and type of
paper loaded.
4. To use another tray, press
.
Loading
program X
DO NOT POWER OFF
Programs and fonts can be stored on the
printer’s file system and are loaded into RAM
when the printer is turned on. The number XX
specifies a sequence number indicating the
current program being loaded.
No action necessary. Do not turn the printer
off.
ENWW Control panel messages 171