Filter
Top Products
Configuring input trays
The printer allows you to configure input trays by type and size. You can load different media in the
printer’s input trays and then request media by type or size using the control panel.
NOTE If you have used other HP LaserJet printer models, you might be accustomed to
configuring Tray 1 to First mode or Cassette mode. On HP Color LaserJet CP4005 Series
printers, setting the Tray 1 size and type to ANY SIZE is equivalent to First mode. Setting the
size or type for Tray 1 to a setting other than ANY SIZE is equivalent to Cassette mode.
NOTE If you are duplex printing, be sure that the media loaded meets the specifications for
duplex printing. (See
Supported media weights and sizes.)
NOTE The instructions below are to configure the trays at the printer control panel. You can
also configure the trays from your computer by accessing the embedded Web server. See
Using
the embedded Web server.
Configuring trays when the printer gives a prompt
In the following situations, the printer automatically prompts you to configure the tray for type and size:
●
When you load paper into the tray
●
When you specify a particular tray or media type for a print job through the printer driver or a
software application and the tray is not configured to match the print job settings
The control panel displays the message LOAD TRAY X [TYPE] [SIZE], To change type press
.
The instructions below explain how to configure the tray after the prompt appears.
NOTE The prompt does not appear if you are printing from Tray 1 and if Tray 1 is configured
for ANY SIZE and ANY TYPE.
Configuring a tray when loading paper
NOTE If media is loaded in optional Tray 3 when the printer is in sleep mode, the printer will
not sense new media when it comes out of sleep mode. This could cause the printer to use wrong
paper for a print job. Be sure to wake the printer before loading media in optional Tray 3.
1. Load paper in the tray. If you are using Tray 2 or optional Tray 3, close the tray.
2. The printer displays the tray configuration message To change size press
.
3. Press
to display the TRAY X SIZE= menu.
4. To change the size, press
or to highlight the correct size.
5. Press
to select the size.
A Setting saved message appears, and then a prompt appears to configure the paper type.
6. To change the type, press
or to highlight the correct paper type.
7. Press
to select the paper type.
ENWW Configuring input trays 83