Filter
Top Products
7. Press to select TRAY BEHAVIOR.
8. Press
to highlight DUPLEX BLANK PAGES.
9. Press
or to select AUTO or YES.
10. Press
to set the behavior.
11. Press Menu.
Setting the printer to rotate images
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight TRAY BEHAVIOR.
7. Press
to select TRAY BEHAVIOR.
8. Press
to highlight IMAGE ROTATION.
9. Press
or to select STANDARD or ALTERNATE.
10. Press
to set the behavior.
11. Press Menu.
Sleep delay
The adjustable sleep mode feature reduces power consumption when the printer has been inactive for
an extended period. You can set the length of time before the printer enters sleep mode to
1 MINUTE, 15 MINUTES, 30 MINUTES, 45 MINUTES, 60 MINUTES, 90 MINUTES, 2 HOURS, or
4 HOURS. The default setting is 30 MINUTES.
NOTE The printer display dims when the printer is in sleep mode. This mode does not affect
printer warm-up time.
Setting sleep delay
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight Sleep Delay.
7. Press
to select Sleep Delay.
58 Chapter 2 Control panel ENWW