Filter
Top Products
Control panel message Description Recommended action
a restore action, such as RESTORE COLOR
VALUES.
Restoring...
factory settings
The printer is restoring factory settings. No action necessary.
RESTRICTED FROM PRINTING IN COLOR
alternates with
Ready
The printer is set to COLOR IF ALLOWED
and you or your software program are not
authorized to print in color.
Get your network administrator to set the user
or program permissions that will allow you to
print in color.
Rotating [COLOR]
motor
To exit press. Stop
A component test is in progress; the
component selected is the <color> cartridge
motor.
Press Stop when ready to stop this test.
Rotating motor
To exit press. Stop
The printer is executing a component test and
the component selected is a motor.
Press Stop when ready to stop this test.
Setting saved A menu selection has been saved. No action necessary.
SIZE MISMATCH
TRAY X=[SIZE]
For help press
alternates with
Ready
The tray is loaded with media longer or
shorter in the feed direction than the size
configured for the tray.
1. Adjust the side and rear media guides
against the paper.
2. If necessary, press after the tray is
closed to change the paper size or type
configuration to match the size or type
in the tray.
Sleep mode on The printer is in sleep mode. A button press,
receipt of printable data, or an error condition
will clear this message.
No action necessary.
SUPPLIES IN
WRONG POSITION
alternates with
For status press
At least one supply item is incorrectly
positioned in the printer and another supply
item is missing, incorrectly placed, out, or low.
1. Press to access the SUPPLIES
STATUS menu.
2. Press and to highlight the specific
supply that has a problem.
3.
Press
to view help for the supply.
4. Press
and to step through the
instructions.
Transfer unit can
be easily damaged.
alternates with
For help press
The supplies gauge will display the
consumption levels of print cartridges.
The cartridge is either not installed or not
correctly installed in the printer.
1. Open the top and front covers.
CAUTION The image
transfer unit can be easily
damaged.
2. Open the image transfer unit.
3. Insert the print cartridge and make sure
that it is fully seated.
180 Chapter 8 Problem solving ENWW