Filter
Top Products
Control panel message Description Recommended action
STORAGE FULL 4. For 68.1 errors, use the HP Web
Jetadmin software to delete files from
the disk drive.
5. For 68.1 errors that persist, contact
HP Support.
68.X PERMANENT
STORAGE WRITE FAIL
A non-volatile storage device is full. Pressing
the
button should clear the message.
Printing can continue, but there may be
unexpected behavior.
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)
1. Press to continue.
2. If the message persists, turn the printer
off then on.
3. If the problem persists, contact
HP Support at
http://www.hp.com/
support/ljcp4005.
68.X STORAGE ERROR
SETTINGS CHANGED
For help press
alternates with
68.X STORAGE ERROR
SETTINGS CHANGED
One or more printer settings saved in the non-
volatile storage device is invalid and has been
reset to its factory default. Pressing the
button should clear the message. Printing
can continue, but there may be unexpected
behavior.
1. Press to continue.
2. If the message persists, turn the printer
off then on.
3. If the problem persists, contact
HP Support at
http://www.hp.com/
support/ljcp4005.
69.X PRINTER ERROR
For help press
alternates with
69.X PRINTER ERROR
To continue
turn off then on
A printer error has occurred.
Turn the printer off then on. Press for more
information.
79.XXXX
PRINTER ERROR
To continue
turn off then on
A critical hardware error has occurred. 1. Turn the printer off then on.
2. If the problem persists, contact
HP Support at http://www.hp.com/
support/ljcp4005.
[FS] DEVICE
FAILURE
To clear press
alternates with
Ready
A device failure has occurred on the specified
drive. Printing can continue for jobs that do
not require the Flash DIMM.
1. To clear the message, press the
key.
2. If the message persists, remove and re-
install the EIO disk drive.
3. Turn the printer back on.
4. If the message still persists, replace the
Flash DIMM.
ENWW Control panel messages 165