Filter
Top Products
Control panel message Description Recommended action
●
Remove the old fuser unit from the
printer.
●
Install the new fuser unit.
●
Close the top cover.
●
Supplies ordering information is
also available from the embedded
Web server. See
Using the
embedded Web server for more
information.
REPLACE SUPPLIES
The supplies gauge will display the
consumption levels of print cartridges.
Multiple supplies are at the end of their useful
life and the REPLACE SUPPLIES setting in
the SYSTEM SETUP menu is set to STOP
AT OUT.
1. Press to access the SUPPLIES
STATUS menu.
2. Press
and to highlight the specific
supply that has a problem.
3.
Press
to view help for the supply.
4. Press
and to step through the
instructions.
5. Supplies ordering information is also
available from the embedded Web
server. See
Using the embedded Web
server for more information.
REPLACE SUPPLIES
For status press
The supplies gauge will display the
consumption levels of print cartridges.
Multiple supplies are at the end of their useful
life. If the supplies affected are cartridges
only, printing has stopped because the
REPLACE SUPPLIES setting in the
SYSTEM SETUP menu is set to STOP AT
LOW. If the affected supplies are cartridges
only, printing will not continue.
1. Press to access the SUPPLIES
STATUS menu.
2. Press
and to highlight the specific
supply that has a problem.
3.
Press
to view help for the supply.
4. Press
and to step through the
instructions.
5. Supplies ordering information is also
available from the embedded Web
server. See
Using the embedded Web
server for more information.
REPLACE SUPPLIES
Override in use
alternates with
<Current status message>
The printer is set to continue printing even
though a print cartridge has reached end of
life.
CAUTION Using the Override
mode can result in unsatisfactory
print quality. HP recommends
replacing the supply when the
REPLACE SUPPLIES Override in
use message appears. The
HP Supplies Premium Protection
Warranty coverage ends when a
supply is used in Override mode.
Press to see step by step information.
REPLACE SUPPLIES
Using black only
alternates with
This message is generated when a print
cartridge (or print cartridges) has reached the
out condition and the printer is set to
AUTOCONTINUE BLACK.
Press
to see step by step information.
178 Chapter 8 Problem solving ENWW