Filter
Top Products
Menu item Values Description
JAM RECOVERY AUTO
OFF
ON
Sets whether the printer will attempt to
reprint pages after a jam. The default is
AUTO.
RAM DISK AUTO
OFF
Allows you to specify how the RAM disk is
configured. When set to AUTO, the printer
determines the optimal RAM disk size
based on the amount of available memory.
The default is AUTO. This message
displays in models that do not have a hard
disk installed.
LANGUAGE A listing of available languages
appears.
Sets the default language. The default
language is ENGLISH.
I/O menu
This menu allows you to configure the printer’s I/O options.
See
Network configuration.
Menu item Values Description
I/O TIMEOUT 15 Seconds
Range: 5 - 300
Allows you to set the printer I/O timeout in
seconds.
EMBEDDED JETDIRECT MENU The values may vary. Possible
values may include:
TCP/IP
SECURE WEB
RESET SECURITY
LINK SPEED
TCP/IP: Use the TCP/IP menu to configure
basic TCP/IP settings.
SECURE WEB: Specify whether the
embedded Web server accepts
communications by using only secure
HTTP (HTTPS) or by using both HTTP and
HTTPS.
RESET SECURITY: Specifies whether the
current security settings on the print server
are saved or reset to factory defaults.
LINK SPEED: Selects the network link
speed and communication mode for the
10/100T print server. To ensure proper
communication, the Jetdirect settings must
match those of the network.
Resets menu
The RESETS menu allows you to reset factory settings, disable and enable sleep mode, and update
the printer after new supplies are installed.
Menu item Values Description
RESTORE FACTORY SETTINGS None. Allows you to clear the page buffer, remove
all perishable personality data, reset the
ENWW Configure device menu 51