Filter
Top Products
Control panel message Description Recommended action
4. Close the image transfer unit and then
close the top and front covers.
5. If the error persists, contact HP Support
at
http://www.hp.com/support/ljcp4005.
TRAY X EMPTY
[TYPE] [SIZE]
alternates with
Ready
The specified tray is empty and the current
job does not need this tray to print.
Refill the tray at a convenient time.
TRAY X OPEN
For help press
alternates with
Ready
The specified tray is open or not closed
completely.
Close the tray.
TRAY X SIZE= [SIZE]
Setting saved
The size selected from the menu has been
saved.
No action is necessary.
TYPE MISMATCH
TRAY X=[TYPE]
For help press
alternates with
Ready
The media type loaded in the tray does not
match the media type configured for the tray.
1. Adjust the side and rear guides against
the paper.
2. If necessary, press
after the tray is
closed to change the paper size or type
to match the paper loaded in the tray.
Unable to mopy job
alternates with
Processing...
The print job cannot be mopied because of a
memory or configuration problem. Only one
copy will be produced.
Install additional memory in the printer.
Unable to Store Job
JOB NAME
alternates with
Processing...
A job cannot be stored because of a memory
or configuration problem.
Install additional memory in the printer.
USB ACCESSORY
ERROR
For help press
This message appears when a connected
USB accessory draws too much power.
When this happens, the ACC port is disabled
and printing stops.
Press to see step by step information.
USE TRAY X
[TYPE] [SIZE]
To change press
/
To use press
The printer is offering a selection of alternate
media to use for the print job.
1. View tray configurations (type and size)
using
and .
2. Press
to select a tray to use.
3. To return to the previous message,
press Back.
Wait for printer RAM disk settings have been changed before
the printer automatically restarts, or external
No action necessary.
ENWW Control panel messages 181