Filter
Top Products
Menu item Values Description
See Changing printer control panel
configuration settings for more information.
Sleep Delay 1 Minute
15 MINUTES
30 MINUTES
45 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
Reduces power consumption when the
printer has been inactive for the selected
period. The default is 30 MINUTES.
WAKE TIME A list of day and hour variables
appears.
When enabled, the default is daily at 7:00
AM. This menu item opens a wizard that
can be used to set the printer wake time.
DISPLAY BRIGHTNESS Range is 1 through 10. Sets the brightness of the control panel
display. The default is 5.
PERSONALITY AUTO
PCL
PDF
PS
Sets the default personality to automatic
switching, PCL, PDF, or PostScript
emulation modes. The default is AUTO.
CLEARABLE WARNINGS JOB
ON
Sets whether a warning is cleared on the
control panel or when another job is sent.
The default is JOB.
AUTO CONTINUE OFF
ON
Determines printer behavior when the
system generates an Auto Continuable
error. The default is ON.
REPLACE SUPPLIES STOP AT LOW
STOP AT OUT
OVERRIDE AT OUT
Sets printer behavior when a cartridge is
low. The default is STOP AT LOW. This
option allows the printer to continue printing
until a color supply is exhausted. When the
printer is set to STOP AT OUT, printing
pauses until the color supply is replaced.
OVERRIDE AT OUT allows printing to
continue when a color supply is out, but
displays a warning that override is in use
and that the supply must be replaced.
ORDER AT RANGE=0-100 The user can set the percent remaining at
which the ORDER AT message appears.
The default is 15.
COLOR SUPPLY OUT STOP
AUTOCONTINUE BLACK
Sets the COLOR SUPPLY OUT printer
behavior when a color supply is empty.
When the printer is set to
AUTOCONTINUE BLACK, the printer will
continue printing using black toner only.
The default is STOP.
50 Chapter 2 Control panel ENWW