Filter
Top Products
5. Align the print cartridge with the tracks inside the printer and insert the cartridge until it is completely
seated.
NOTE The print cartridge tape seal is removed automatically when the print cartridge is
installed in the printer.
NOTE If a cartridge is in the wrong slot, the control panel will display the message
INCORRECT [COLOR] CARTRIDGE.
6. Close the front cover and then close the top cover. After a short while, the control panel should
display Ready.
7. Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived.
See the enclosed recycling guide for recycling instructions.
8. If you are using a non-HP print cartridge, check the control panel for further instructions.
For additional help, go to
http://www.hp.com/support/ljcp4005.
146 Chapter 7 Maintenance ENWW