Filter
Top Products
Control panel message Description Recommended action
57.0X
PRINTER ERROR
To continue
turn off then on
A printer fan error has occurred. 1. Turn the printer off then on.
2. If the problem persists, contact
HP Support at
http://www.hp.com/
support/ljcp4005.
58.0X
PRINTER ERROR
For help press
alternates with
58.0X
PRINTER ERROR
To continue
turn off then on
A memory tag error was detected. 1. Turn the printer off then on.
2. If the problem persists, contact
HP Support at http://www.hp.com/
support/ljcp4005.
59.XY
PRINTER ERROR
For help press
alternates with
59.XY
PRINTER ERROR
To continue
turn off then on
A printer motor error has occurred. 1. Turn the printer off then on.
2. If the problem persists, contact
HP Support at http://www.hp.com/
support/ljcp4005.
Note: This message might also appear
if the transfer unit is missing or
incorrectly installed. Ensure that the
transfer unit is correctly installed.
60.X
PRINTER ERROR
alternates with
To continue
turn off then on
A tray lifting error has occurred, where XX is
the number of the tray.
1. Press to see step by step information.
2. If the error reappears, turn the printer off
then on.
3. If the error does not clear, record the
message and contact HP Support at
http://www.hp.com/support/ljcp4005.
62 NO SYSTEM
To continue
turn off then on
No system was found. 1. Turn the printer off then on.
2. If the problem persists, contact
HP Support at
http://www.hp.com/
support/ljcp4005.
68.X PERMANENT
STORAGE FULL
For help press
alternates with
68.X PERMANENT
A non-volatile storage device is full. Pressing
the
button should clear the message.
Printing can continue, but there may be
unexpected behavior.
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)
1. Press
to continue.
2. For 68.0 errors, turn the printer off then
on.
3. If a 68.0 error persists, contact
HP Support.
164 Chapter 8 Problem solving ENWW