Filter
Top Products
5 - 50
Peripherals
Start > Settings > Control Panel > Peripherals
These panels are used to enable and disable the touch screen and scanner window heaters, and they are also used to set
the time limit for the flashlight. Using the GPS tab, power to the GPS can be toggled on or off.
Heaters Tab
Note: Setting has no effect if the heater is not installed.
Tap the radio button to enable or disable the touch screen and/or scanner aperture (window) heater.
Setting Default
Heaters
Touch screen heater Enabled
Scanner window heater Enabled
Flashlight
Turn flashlight off after 1 minute
GPS
GPS Power ON when installed / OFF when not installed