Filter
Top Products
7 - 10
Reconnect
Note: These options can still be checked or unchecked whether Bluetooth connection is enabled or disabled.
Options
Report when connection lost
This option is Enabled by default. There may be an audio or visual signal when a connection between a paired, active
device is lost. A visual signal may be a dialog box placed on the display notifying the user the connection between one (or
all) of the paired Bluetooth devices has stopped. Tap the ok button to remove the dialog box from the screen.
Report when reconnected
This option is Disabled by default. There may be an audio or visual signal when a connection between a paired, active
device is made. A visual signal may be a dialog box placed on the display notifying the user the connection between one (or
all) of the paired Bluetooth devices has resumed. Tap the ok button to remove the dialog box from the screen.
Report failure to reconnect
This option is Enabled by default. The default time delay is 30 minutes. This value cannot be changed by the user.
There may be an audio or visual signal when a connection between a paired, active device fails to re-connect. A visual sig-
nal may be a dialog box placed on the display notifying the user the connection between one (or all) of the previously paired
Bluetooth devices has failed. Tap the X button or ok button to close the dialog box. Possible reasons for failure to reconnect:
Timeout expired without reconnecting; attempted to pair with a device that is currently paired with another device;
attempted to pair with a known device that moved out of range or was turned off; attempted to pair with a known device but
the reason why reconnect failed is unknown.
Clear Pairing Table on Boot
This option is Disabled by default. When enabled (checked), all previous paired information is deleted upon any reboot
sequence and no devices are reconnected. When enabled (checked) “Auto Reconnect on Boot” is automatically disabled
(dimmed).
Auto Reconnect on Boot
This option is Enabled by default. All previously paired devices are reconnected upon any reboot sequence. When disabled
(unchecked), no devices are reconnected upon any reboot sequence.
Auto Reconnect
This option is Enabled (checked) by default. This option controls the overall mobile Bluetooth device reconnect behavior.
When Auto Reconnect is disabled (unchecked), Auto Reconnect on Boot is automatically disabled and dimmed. When Auto
Reconnect is disabled (unchecked), no devices are reconnected in any situation. The status of Auto Reconnect on Boot is
ignored and no devices are reconnected on boot. The status of Clear Pairing Table on Boot controls whether the pairing
table is populated on boot. When Auto Reconnect is enabled (checked) and Auto Reconnect on Boot is disabled
(unchecked), devices are not reconnected on boot, but are reconnected in other situations (example: return from out-of-
range). When Auto Reconnect is enabled (checked) and Clear Pairing Table on Boot is enabled (checked), devices are not