Filter
Top Products
6 - 7
Launch Button
When the Launch button is clicked, it displays the Launch options panel for the Filename selected on the Administra-
tion panel.
Note: Launch order is determined by the Order specified in the Application tab. The Order value does not have to be
sequential.
Auto At Boot
Default is Enabled.
Auto At Boot
When enabled, automatically launches (subject to the specified Delay in seconds) the application after the unit is
rebooted. If a Delay in seconds is specified, AppLock waits for the specified period of time to expire before launching
the application. The Delay default value is 10 seconds; valid values are between 0 “no delay” and a maximum of 999
seconds.
Retries
This is the number of times the application launch will be retried if a failure occurs when the application is automati-
cally launched at bootup. Valid values are between 0 (no tries) and 99 tries or -1 for infinite. Infinite tries ends when the
application successfully launches. The default is 0 retries.
Delay
This timer is the time that AppLock waits prior to the initial launch of the selected application when it is automatically
launched at bootup. Delay default is 10 seconds. Valid values are between 0 seconds (no delay) and 999 seconds.
The Auto At Boot delay is associated for each application; it will be either a value specified by the Administrator or it will
be the delay default value. At startup, when a delay has been assigned for each application, AppLock waits for the
delay associated with the first application to expire before launching the first application then AppLock waits for the
delay associated with the second application to expire before launching the second application. AppLock continues in
this manner until all applications are launched.
Note: A “Global Delay” can be accomplished by setting a timed delay for the first application to be launched (by lowest
Order number) and no delay (0 seconds) for all other applications.
Note: Launch order is determined by the Order specified in the Application tab. The Order value does not have to be
sequential.