Filter
Top Products
10 - 15
TX Diversity BG: On
A: Main
Only
How to handle antenna diversity when transmitting packets to the Access
Point.
Options are: Main only (use the main antenna only), Aux only (use the
auxiliary antenna only), or On (use diversity or both antennas).
TX Diversity option should be set based on the antenna configuration as
follows:
• Antenna Configuration: A Main and BG Main. TX Diversity: Main.
• Antenna Configuration: A Main and A Aux. TX Diversity: On.
• Antenna Configuration: BG Main and BG Aux. TX Diversity: On.
RX Diversity BG: On-
Start on
Main
A: Main
Only
How to handle antenna diversity when receiving packets from the Access
Point.
Options are: Main Only (use the main antenna only), Aux Only (use the
auxiliary antenna only), On-start on Main (on startup, use the main
antenna), or On-start on Aux (on startup, use the auxiliary antenna).
RX Diversity option should be set based on the antenna configuration as
follows:
• Antenna Configuration: A Main and BG Main. RX Diversity: Main.
• Antenna Configuration: A Main and A Aux. RX Diversity: On-start on
Main.
• Antenna Configuration: BG Main and BG Aux. RX Diversity: On-start on
Main.
Frag Thresh 2346 If the packet size (in bytes) exceeds the specified number of bytes set in
the fragment threshold, the packet is fragmented (sent as several pieces
instead of as one block). Use a low setting in areas where communication
is poor or where there is a great deal of wireless interference.
Options are: Any number between 256 bytes and 2346 bytes.
RTS Thresh 2347 If the packet size exceeds the specified number of bytes set in the Request
to Send (RTS) threshold, an RTS is sent before sending the packet. A low
RTS threshold setting can be useful in areas where many client devices
are associating with the Access Point.
Options are: Any number between 0 and 2347.
LED Off The LED on the wireless card is not visible to the user when the wireless
card is installed in a sealed mobile device.
Options are: On, Off.
Tray Icon On Determines if the Summit icon is displayed in the System tray.
Options are: On, Off
Hide Password On When On, the Summit Config Utility masks passwords (characters on the
screen are displayed as an *) as they are typed and when they are viewed.
When Off, password characters are not masked.
Options are: On, Off.
Admin Password SUMMIT
(or Blank)
A string of up to 64 alphanumeric characters that must be entered when
the Admin Login button is tapped. If Hide Password is On, the password is
masked when typed in the Admin Password Entry dialog box. The
password is case sensitive. This value is masked when the Admin is
logged out.
Options are: none.
Parameter Default Function