Filter
Top Products
12 - 6
NO LIGHT - on all charge pockets
No light means there is no AC power available for the battery charger or there is power but there are no batteries in any
charging bay.
Battery Charger Help
The following is intended as an aid in determining whether the battery pack or the charger may be malfunctioning:
Issue Cause Solution
Battery pack does not fit in charging
pocket.
Different manufacturer's battery
pack, or there is an object in the
charging pocket.
Check if the MX9 battery pack has
Honeywell part number MX9380BATT or
MX9381BATT (Low Temperature) on the
label. If not, do not use.
Remove the object from the charging
pocket.
No battery pack in charger, but any of the
LEDs are on.
Dirt or foreign objects are in the
charging pocket.
Unplug charger from AC supply. Remove
any dirt or foreign objects from the
charging pocket. If the LEDs continue to
remain ON, the charger may be defective.
Return charger to an authorized
Honeywell service center.
Charger is plugged into a live outlet,
battery pack is inserted, but RED LED is
OFF and no other LEDs are on, or all
LEDs are off.
Battery pack is not making
contact with battery charge
terminals in the charging pocket.
Push battery pack in firmly. Do not “slam”
the battery pack into the charging pocket.
Charger is plugged into a live outlet,
battery pack is inserted, but RED LED is
OFF and no other LEDs are on, or all
LEDs are off.
Faulty battery pack. Replace battery pack.
Charger is plugged into a live outlet,
battery pack is inserted, but RED LED is
OFF and no other LEDs are on, or all
LEDs are off.
New battery pack, same result. Contact Customer Support (page 15-1) for
replacement options.
When you first put a fully charged battery
pack in the charging pocket, the RED
LED comes on, indicating the battery
pack is charging.
During the first few minutes, the
battery charger checks the
battery pack for correct voltage
and charge state. During this time
the LED is RED and is
continuously ON. After charging
is complete, the LED is GREEN.
There is nothing wrong with the battery
pack or charger.
Do not “top off” a fully charged battery
pack by repeatedly placing it in the
charging pocket. The battery pack may
overheat and be damaged.
LED is flashing RED at any pocket. Current could not be sourced
through the battery pack due to
age, exhaustion or damage to the
cell(s). The battery pack does not
communicate with the charger.
Contact Customer Support (page 15-1) for
battery pack replacement options.
LED is flashing RED at any pocket. The charger’s timeout period has
expired.
Make sure that the battery pack
temperature is within specification and
retry charging. Contact Customer Support
(page 15-1) if problem repeats, for battery
pack replacement options.