Filter
Top Products
5 - 70
Admin Tab
The Admin tab provides the ability to change the configuration password (see the Connection Tab (page 5-65)), enter
Identification numbers for the SIM card, and provides a button to disable/enable the radio.
Password
Enter a new password, then re-enter the same password. Tap Submit to save the new password.
Tap the Enable Radio button to turn the radio On or Off. When the radio is Off, the Admin password will need to be
entered before the radio can be set to On.
PIN (Personal Identification Number)
The PIN is a unique sequence of numbers stored on the SIM card.
If the radio is enabled and the SIM card requires a PIN, a connection will not occur until the PIN is entered successfully.
After entering the PIN code, tap the Submit button. A message is displayed with either Success or the number of
retries allowed before the SIM card PIN number entry is locked from further use.
If the radio is disabled, entering and submitting the PIN saves the PIN value on the MX9. The next time the radio is
enabled and requires a PIN, the saved PIN will be sent and a PIN will not need to be entered again.
PUK (Personal Unblocking Key)
The PUK is a unique sequence of alpha characters displayed on the SIM card. A default PUK code is not available.
After entering the PUK code, tap the Submit button. A message is displayed with either Success or the number of
retries allowed before the SIM card PUK entry is locked from further use.
Enable/Disable Radio button
Tap the Enable Radio button to turn the radio On or Off. If the radio is currently enabled, the button is labeled Disable
Radio. If the radio is currently disabled, the button is labeled Enable Radio.