Filter
Top Products
5 - 64
Wi-Fi
Start > Settings > Control Panel > Wi-Fi
or
Tap the Summit Client Utility icon
Use this option to set parameters and manage profiles for the wireless client pre-loaded on your MX9. See Wireless
Network Configuration (page 10-1) for more information.
WWAN
Start > Settings > Control Panel > WWAN
These panels can be used to set the parameters for the Wireless Wide Area Network (WWAN) on the MX9. The WWAN is
a form of wireless network that utilizes a cellular network instead of the spread spectrum network most used by Wireless
Local Area Networks (WLAN).
Setting Default
Connection tab
Status Not Connected
Connect button Dimmed
Admin Login button Enabled
Network tab
Phone, Username, Password, APN Blank
TCP/IP tab
DHCP Enabled, dimmed
DNS Enabled, dimmed
Addresses Pre-populated, dimmed
Security tab
use Extensible Auth Protocol Enabled
Autoconnect tab
Automatically connect - turned On Disabled, dimmed
Automatically reconnect Enabled, dimmed
Admin tab
Admin Factory Default Password LXEWWAN
Enable Radio button Dimmed
PIN (Personal Identification Number) Enabled, Blank
PUK (Personal Unblocking Key) Disabled, Dimmed