Filter
Top Products
5 - 78
7. The host PC displays the MX9 screen.
8. The MX9 can now be configured from the HSM Connect window. Input from the host PC’s mouse and keyboard are
recognized as if they were attached to the MX9.
9. When the remote session is complete, close the HSM Connect program by selecting File > Exit or clicking on the X
in the upper right hand corner to close the application on the host PC, then disconnect the ActiveSync cable.
Note: After using HSM Connect, the MX9 cannot go into Suspend mode until after a warmboot. If using Power
Management on a MX9, always warmboot the MX9 when finished using HSM Connect.