Filter
Top Products
7 - 4
Bluetooth Devices
The Bluetooth Devices tab displays any device previously discovered and paired with the MX9.
Clear Button
When the Clear button is tapped, the Bluetooth client deletes all devices from the Device table that are not currently paired.
A dialog box is presented stating Delete all disconnected devices?
Tap the Yes button to remove disconnected or deleted devices from the device table. The devices are removed from the
Device table after any reboot sequence and when EZPair (or LXEZ Pairing) is re-launched without rebooting. Tap the No
button to make no changes.
Discover Button
When the Discover button is tapped, the Bluetooth client discovers and displays all Bluetooth devices in the vicinity. Blue-
tooth managed devices should be as close as possible, in direct line of sight, with the MX9 during the Discover process.
At the end of the Discover process, and when Filtered Mode is disabled (not checked), serial Bluetooth devices as well as
Bluetooth scanners and printers are displayed in the Device table. When Filtered Mode is enabled (checked), only Blue-
tooth scanners and printers are displayed in the Device table.
Before Discover After Discover