Filter
Top Products
6 - 19
Timeout looking for app window After the application is launched, AppLock must wait
until the application has initialized itself before
proceeding. The application did not start
successfully and AppLock has timed out.
LOG_ERROR
ToUser after admin, not at boot The user mode switch is attempted when the device
boots and after the administrator presses the
hotkey. The mode switch is being attempted after a
hotkey press.
LOG_EX
ToUser after admin-app still open The switch to user mode is being made via a hotkey
press and the administrator has left the application
open and has not made any changes in the
configuration.
LOG_EX
ToUser after admin-no app or cmd line
change
If user mode is being entered via a hotkey press, the
administrator may have left the configured
application open. If so, AppLock does not launch the
application again unless a new application or
command line has been specified; otherwise, it just
locks it.
LOG_EX
Unable to move desktop The desktop is moved when switching into user
mode. This prevents them from being visible if the
application is exited and restarted by the timer. This
error does not affect the screen mode switch;
processing continues.
LOG_ERROR
Unable to move taskbar The taskbar is moved when switching into user
mode. This prevents them from being visible if the
application is exited and restarted by the timer. This
error does not affect the screen mode switch;
processing continues.
LOG_ERROR
Unhook taskbar wndproc failure AppLock could not remove its control of the taskbar.
This error does not affect AppLock processing
LOG_ERROR
Unhook wndproc failure AppLock could not remove the hook that allows
monitoring of the application.
LOG_ERROR
Unhooking taskbar In administration mode, the taskbar should return to
normal operation, so AppLock’s control of the
taskbar should be removed.
LOG_EX
Unhooking wndproc When the administrator leaves user mode, the
device is fully operational; therefore, AppLock must
stop monitoring the locked application.
LOG_EX
WM_SIZE adjusted This message denotes that AppLock has readjusted
the window size.
LOG_EX
X after Ctrl+L Processing the backdoor entry. LOG_EX
Ret from password <#> Return value from password dialog. LOG_EX
Decrypt data len <#> Length of decrypted password. LOG_EX
Window handle to enumwindows=%x The window handle that is passed to the
enumeration function. This message can be used
by engineering with other development tools to
trouble shoot application lock failures.
LOG_EX
WM_WINDOWPOSCHG adjusted=%x Output the window size after it has been adjusted by
AppLock
LOG_EX
Message Explanation and/or corrective action Level