Honeywell MX9 Laptop User Manual


 
6 - 16
Exit ToAdmin Exiting the function that handles the mode switch
into admin mode.
LOG_PROCESSING
Exit ToUser Exiting the user mode switch function. LOG_PROCESSING
Exit ToUser-Registry read failure The AppName value does not exist in the registry so
user mode cannot be entered.
LOG_PROCESSING
Exit verify password-no pwd set Exiting password verification. LOG_PROCESSING
Exit verify password-response from dialog Exiting password verification. LOG_PROCESSING
Found taskbar The handle to the taskbar has been found so that
AppLock can disable it in user mode.
LOG_PROCESSING
Getting address of keyboard hook init
procedure
AppLock is retrieving the address of the keyboard
hook.
LOG_PROCESSING
Getting configuration from registry The AppLock configuration is being read from the
registry. This occurs at initialization and also at entry
into user mode. The registry must be re-read at
entry into user mode in case the administration
changed the settings of the application being
controlled.
LOG_PROCESSING
Getting encrypt pwd length The length of the encrypted password is being
calculated.
LOG_EX
Hook wndproc failure AppLock is unable to lock the application. This could
happen if the application being locked encountered
an error after performing its initialization and shut
itself down prior to being locked by AppLock.
LOG_ERROR
Hook wndproc of open app failure The application is open, but AppLock cannot lock it. LOG_ERROR
Hot key event creation failure The Admin applet is unable to create the hotkey
notification.
LOG_ERROR
Hot key pressed Processing the hotkey and backdoor entry LOG_EX
Hot key pressed Processing the hotkey and backdoor entry LOG_EX
Hot key set event failure When the administrator changes the hotkey
configuration the hotkey controller must be notified.
This notification failed.
LOG_ERROR
Hotkey press message received The user just pressed the configured hotkey. LOG_PROCESSING
In app hook:WM_SIZE In addition to preventing the locked application from
exiting, AppLock must also prevent the application
from enabling the taskbar and resizing the
application’s window. This message traps a change
in the window size and corrects it.
LOG_EX
In app
hook:WM_WINDOWPOSCHANGED
In addition to preventing the locked application from
exiting, AppLock must also prevent the application
from enabling the taskbar and resizing the
application’s window. This message traps a change
in the window position and corrects it.
LOG_EX
Initializing keyboard hook procedure AppLock is calling the keyboard hook initialization. LOG_PROCESSING
Keyboard hook initialization failure The keyboard filter initialization failed. LOG_ERROR
Keyboard hook loaded OK The keyboard hook dll exists and loaded
successfully.
LOG_EX
L after Ctrl Processing the backdoor entry. LOG_EX
Message Explanation and/or corrective action Level